Unit 9 Principles of Heating, Ventilation and Air Conditioning Assignment Brief
| Qualification | Pearson BTEC Higher Nationals Construction |
| Unit Number | 9 |
| Unit Title | Principles of Heating, Ventilation and Air Conditioning |
| Unit code | M/618/8088 |
| Unit level | 4 |
| Credit value | 15 |
Introduction
The buildings we use in everyday life – to work, study, socialise and live in – can be increasingly complex in their design, as well as being subject to more stringent environmental targets for emissions. The heating, ventilation and air conditioning systems in buildings play a major role in maintaining the comfort of the occupants and managing environmental impact.
This unit introduces students to the principles of the design and installation of heating, ventilation and air conditioning systems for non-domestic buildings.
In this unit, students will develop an understanding of the components and systems that may be integrated into a building services installation, including key calculations, sizing and specification of non-domestic heating, ventilation and air conditioning systems and components.
Learning Outcomes
By the end of this unit, students will be able to:
LO1 Prepare the pre-design information required for a non-domestic heating, ventilation and air conditioning installation
LO2 Analyse the heating and cooling loads for a non-domestic building
LO3 Present a design proposal for a heating, ventilation and air conditioning system for a given non-domestic building type
LO4 Justify the selection of non-domestic heating, ventilation and air conditioning system components for a proposed installation.
Essential Content
LO1 Prepare the pre-design information required for a non-domestic heating, ventilation and air conditioning installation
The design process
Design stages and tasks
Legislation and regulation (e.g., building regulations, professional bodies, codes of practice)
Health and safety
Design constraints
Risk assessment
Pre-design/design brief
Building form
Building orientation
Air tightness
Fabric insulation
Glazing
Thermal mass
Occupancy, usage details
Potential internal loads
Budget
Cost plan
Health and safety risk assessment
Design data
External design data
Internal design condition
Design standards and statutory requirements
Publications and guides
Contracts
Consultancy
Sub-contract
Management
Installation
Maintenance
Sustainability
Existing energy use
Potential of passive systems (e.g., solar gain, passive ventilation)
Building fabric modifications (e.g., improved glazing systems, insulation)
LO2 Analyse the heating and cooling loads for a non-domestic building
U-values
Calculation of U-values for composite structures
Heat loss
Calculation of heat losses
Ventilation heat losses
Total heating loads and heating plant capacity
Plant diversity
Plant configuration
Single and multiple boiler options
Minimising heat loads
Cooling loads due to solar radiation
Solar geometry and terminology
Direct and diffuse solar radiation
Calculation of solar irradiance on vertical, horizontal and pitched surfaces
Transmission of solar radiation on building structures
Total cooling load and cooling plant capacity
Factors contributing to cooling plant capacity Assessment of total heat gains to the interior
Effect of building construction and orientation
Use of tables
Reference data and software to determine cooling loads for rooms, zones and buildings
Strategies to prevent building overheating Effect of shadows and shading
Passive and active cooling measures
Peak summertime temperatures
Calculation and assessment of peak summertime temperatures in rooms
Use of tables
Reference data and computer software
LO3 Present a design proposal for a heating, ventilation and air conditioning system for a given non-domestic building type
Heating media and distribution systems
Requirements of the heating system
Radiant and convective output
Distribution
Zoning options
Integration with domestic hot water (DHW) requirements, integration with low-carbon technology options.
Heating media options
Radiant
Air
Water (e.g., low pressure hot water (lphw), medium pressure hot water (mphw), high pressure hot water (hphw), steam)
System layouts
Centralised or de-centralised
Distribution system layout options
Two-pipe
Reverse return
Constant flow and variable flow systems
Heat emitters
Radiators
Natural convectors
Underfloor heating
Fan convectors Radiant panels
Heat sources
Direct and indirect options
Conventional boilers or other heat sources such as heat pumps or combined heat and power (CHP)
Fuel options and possible storage requirements
Boiler and burner types
Plant room design requirements
Flue and chimney design
Heating system components
Pipework
Pumps
Pressurisation units
Expansion vessels
Air and dirt separators
Pipework expansion devices
Regulating valves
Fire collars
Ventilation systems
Natural ventilation systems
Mechanical ventilation systems
Mixed mode and displacement ventilation systems Process, fume and dust extraction systems
Free cooling and night purging
Mechanical ventilation heat recovery (MVHR) systems
Air conditioning systems
Properties and characteristics of comfort cooling and close control application Humidity control
Cooling coils (e.g., direct expansion (DX), chilled water)
Centralised and local plant selection
Air conditioning systems (e.g., constant volume (CV), variable air volume (VAV), fan coils units, chilled beams, chilled ceilings, room-based heat pumps (versatemp systems), split systems, heat pumps, variable refrigerant flow (VRF) systems)
LO4 Justify the selection of non-domestic heating, ventilation and air conditioning system components for a proposed installation
Sizing and specification of heating system components
Pipes
Pumps
Pressurisation units
Expansion vessels
Low loss header
Air and dirt separators
Pipework expansion devices
Regulating valves
Fire collars
Commissioning, testing and handover procedures
Sizing and specification of ventilation system components
Duct sizing
Fan sizing
Fan selection and fan laws
Damper sizing and selection
Air handling unit (AHU) sizing and selection
Grille and diffuser sizing and selection
Sizing and specification of air conditioning system components
Psychrometric principles
Use of psychrometric charts to size cooling and heating coils and humidification requirements
Refrigeration principles
Plotting refrigeration cycles and calculation of coefficient of performance (COP)
Sizing and specification of heat pumps and VRF systems
Commissioning, testing and handover procedures
Current standards and procedures for commissioning ventilation and air conditioning systems
Commissioning procedures for ventilation and air conditioning system components
Commissioning schedules and handover documentation
Sustainability
Energy use
Use of passive systems
Overall strategy (e.g., building fabric, insulation, HVAC solution)
Learning Outcomes and Assessment Criteria
| Pass | Merit | Distinction |
| LO1 Prepare the pre-design information required for a non-domestic heating, ventilation and air conditioning installation |
D1 Evaluate the health and safety and environmental legislation relevant to the design and operation of a non-domestic heating, ventilation and air conditioning installation. |
|
| P1 Explain the design process stages and tasks for a non-domestic heating, ventilation and air conditioning installation.
P2 Produce design data for a heating, ventilation and air conditioning installation for a given non-domestic building. P3 Prepare a health and safety risk assessment for a non-domestic heating, ventilation and air conditioning installation. |
M1 Analyse human comfort requirements to support a proposed non-domestic heating, ventilation and air conditioning installation. | |
| LO2 Analyse the heating and cooling loads for a non-domestic building | ||
| P4 Undertake calculations to establish u-values, heat loss and total heat/cooling loads for a given non-domestic building.
P5 Compare the impact of changes to materials on calculation of u-values, heat loss and heating/cooling loads for a given non-domestic building. |
M2 Assess the current requirements for minimum u-values in domestic and non-domestic buildings. | |
| Pass | Merit | Distinction |
| LO3 Present a design proposal for a heating, ventilation and air conditioning system for a given non-domestic building type |
D2 Evaluate options for a non-domestic heating, ventilation and air conditioning installation to improve sustainability in a given project. |
|
| P6 Discuss suitable alternative heating, ventilation and air conditioning strategies for a given non-domestic building type.
P7 Present a design proposal for a non-domestic heating, ventilation and air conditioning installation. |
M3 Analyse the performance of selected components of a heating, ventilation, and air conditioning installation. | |
| LO4 Justify the selection of non-domestic heating, ventilation and air conditioning system components for a proposed installation | ||
| P8 Calculate sizes of pipework and ducting for a proposed heating, ventilation and air conditioning installation.
P9 Discuss how selected heating, ventilation and air conditioning components meet the requirements of the given building. |
M4 Discuss how the
selection of different components impacts on an installation strategy. |
|
Are You Searching Answer of this Question? Request British Writers to Write a plagiarism Free Copy for You.
The post Unit 9 Principles of Heating, Ventilation and Air Conditioning Assignment Brief 2026 appeared first on BTEC Assignment UK.